| Device | Dimensions | Truing | Mounting | Features |
| TD01 | L = 2
5/8 in. (67mm) W = 3 in. (76mm) H = 1 3/4 in. (44mm) |
X-Y-Z-q | Mounts to MCD01 Attaches to all work piece holders except V03 & V08 | ·
Vertical Z-axis adjustment · Exclusive fast and easy three point truing procedure |
| TD02 | L = 3 1/4 in.
(83mm) W = 5 3/8 in. (137mm) H = 2 in. (51mm) |
X-Y-Z-q | Mounts to MCD01 Attaches to V08 | ·
Stronger for large loads · Low profile for flush cup clearance |
| TD03 | L = 4
7/16 in. (113mm) W = 3 in. (76mm) H = 2 3/8 in. (60mm) |
X-Y-q | Mounts directly to Rail |
·
Added clearance for smaller machines · Single bolt for easy loading and unloading |
| TD04 | L = 2
5/8 in. (67mm) W = 3 in. (76mm) H = 1 3/4 in. (44mm) |
X-Y-Z-q | Mounts to MCD01 Attaches to VE01 | · Provides holding of work piece above or below zero level when combined with VE01 |
| TD05 | L = 4
7/8 in. (124mm) W = 5 3/8 in. (137mm) H = 2 in. (51mm) |
X-Y-q | · Designed specifically for TD02 | |
| TD3R01 | L = 2
5/8 in. (67mm) W = 3 in. (76mm) H = 1 3/4 in. (44mm) |
X-Y-Z-q |
Mounts to MCD01 Attaches to most System 3R work piece holders | ·
Fast, easy truing · Fast loading & unloading of work piece · Improved repeatability |
| TDH01 | L = 2
5/16 in. (59mm) W = 3 in. (76mm) H = 1 3/4 in. (44mm) |
X-Y-q | Attaches to Hirschmann H2480 & H2485 multiholders | · Allows for the use of most Gaiser work piece holders on the Hirschmann system |