Dual Dovetail Vise Model: DDV01

The DDV01 vise has two independent vises in one. Each fixed jaw is located on the left side, which is the same reference side as the form tool. The vise will hold dovetail widths from 5/8 inch (16mm) to 3 inches (76mm) wide. To allow for easier set-ups, the jaws are spaced exactly 4.0 inches (102mm) apart.

Features:

• Faster set-up time (no touch off required)
• Holds two dovetails from 5/8 - 3.0 inches (16mm - 76mm)
• Two independent vises in one
  

Note: For increased clearance for a smaller machine table, use together with the TD03 truing device.

 

Category Specification Workpiece Weight Capacity N/A Workpiece Size Capacity 1 or 2 dovetails from 5/8 in. to 3 in. Overall Dimensions (L x W x H) 3 1/8 x 10 1/8 x 1 in. (79 x 258 x 25 mm) Truing Device TD01, TD03 Replaceable Jaws N/A Accuracy Repeatable clamping to 0.00008 in. (2 micron) Truing X-Y-q axes

Tooling Level Parts Needed Level 1 N/A Level 2 CK01 or CK02 Toe Clamp Kits Level 3 TD03 Truing Device and Rail Level 4 MCD01 or MCD02 Clamping Devices, TD01 Truing Device, and Rail